Jiangxi Zhongcheng Shears Co.,LtdJiangxi Zhongcheng Shears Co.,Ltd
CONTACT US
Fax: 0791-8821073
Tel: 0791-8821073
E-MAIL: service@jsrpzc.com

Shearing machine what are the main categories

cut Board machine main has: mechanical cut Board machine, and NC cut Board machine, and hydraulic cut Board machine, and NC pendulum type cut Board machine, and NC Qian sent material pendulum type cut Board machine, and hydraulic pendulum type cut Board machine, and super thick hydraulic pendulum type cut Board machine, and hydraulic Gate type cut Board machine, and deep throat mouth cut Board machine, and foot cut Board machine, and precision cut Board machine


, shearing machines 1. Classified according to shapes of scissors
shears scissors shape into straight knife cutting machines and disc shears.
straight knife cutting machines by structure divided into square sheet shear shearing machine and the throat.
cutter shears by structure divided into disc and disc shears, rolling and shearing machine, multiple disc shears and Rotary trimming shears.
2. By turret of movement track classification
cut Board machine by turret of movement track is divided into following several:
(1) turret along vertical movement, as Figure 4-1 (a) by shows, due to no Qian dip, so Shang blade section must processing into diamond, so only two a edged (four a edged of rectangle blade also available, but shear quality poor), this turret shear of fracture and board surface not right angle.
(2), head along the forward line (vertical angle of 1 ° 30 ' ~2 °) movement, as in Figure 4-l (b), as shown in the blades profile machining on a rectangular, with four blades, shear fracture and surface at right angles.
(3) turret swing along the circular line, as shown in Figure 4-1 (c) as shown. Shear blades cross section suitable for processing into a diamond, it only has two blades, because leaning forward slightly in the upper blade in the cutting process, therefore cutting quality and head along the forward motion is similar.
(4) turret swing along the circular line, angle of up to 300, you can cut out the Groove

BACK